Publications


Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
2005
SR Agnew, Ö Duygulu / International Journal of plasticity 21 (6), 1161-1193
Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
2001
SR Agnew, MH Yoo, CN Tome / Acta Materialia 49 (20), 4277-4289
The texture and anisotropy of magnesium–zinc–rare earth alloy sheets
2007
J Bohlen, MR Nürnberg, JW Senn, D Letzig, SR Agnew / Acta Materialia 55 (6), 2101-2112
Hardening evolution of AZ31B Mg sheet
2007
XY Lou, M Li, RK Boger, SR Agnew, RH Wagoner / International Journal of Plasticity 23 (1), 44-86
Enhanced ductility in strongly textured magnesium produced by equal channel angular processing
2004
SR Agnew, JA Horton, TM Lillo, DW Brown / Scripta Materialia 50 (3), 377-381
Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling
2003
SR Agnew, CN Tomé, DW Brown, TM Holden, SC Vogel / Scripta Materialia 48 (8), 1003-1008
Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31
2009
G Proust, CN Tomé, A Jain, SR Agnew / International Journal of Plasticity 25 (5), 861-880
Internal strain and texture evolution during deformation twinning in magnesium
2005
DW Brown, SR Agnew, MAM Bourke, TM Holden, SC Vogel, CN Tomé / Materials Science and Engineering: A 399 (1-2), 1-12
Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet
2007
A Jain, SR Agnew / Materials Science and Engineering: A 462 (1-2), 29-36
Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A
2008
L Wu, A Jain, DW Brown, GM Stoica, SR Agnew, B Clausen, DE Fielden, ... / Acta Materialia 56 (4), 688-695
Reorientation and stress relaxation due to twinning: modeling and experimental characterization for Mg
2008
B Clausen, CN Tomé, DW Brown, SR Agnew / Acta Materialia 56 (11), 2456-2468
Validating a polycrystal model for the elastoplastic response of magnesium alloy AZ31 using in situ neutron diffraction
2006
SR Agnew, DW Brown, CN Tomé / Acta materialia 54 (18), 4841-4852
Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion: Experiments and simulations
2005
SR Agnew, P Mehrotra, TM Lillo, GM Stoica, PK Liaw / Acta Materialia 53 (11), 3135-3146
Cyclic softening of ultrafine grain copper
1998
SR Agnew, JR Weertman / Materials Science and Engineering: A 244 (2), 145-153
Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet
2008
A Jain, O Duygulu, DW Brown, CN Tomé, SR Agnew / Materials Science and Engineering: A 486 (1-2), 545-555
Nonbasal deformation modes of HCP metals and alloys: role of dislocation source and mobility
2002
MH Yoo, JR Morris, KM Ho, SR Agnew / Metallurgical and Materials Transactions A 33 (3), 813-822
Transmission electron microscopy investigation of <c+a> dislocations in Mg and α-solid solution Mg-Li alloys
2002
SR Agnew, JA Horton, MH Yoo / Metallurgical and Materials Transactions A 33 (3), 851-858
Preface to the viewpoint set on: The current state of magnesium alloy science and technology
2010
SR Agnew / Scripta Materialia 63 (7), 671-673
Internal stress relaxation and load redistribution during the twinning–detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A
2008
L Wu, SR Agnew, DW Brown, GM Stoica, B Clausen, A Jain, DE Fielden, ... / Acta Materialia 56 (14), 3699-3707
Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet
2010
H Wang, B Raeisinia, PD Wu, SR Agnew, CN Tomé / International Journal of Solids and Structures 47 (21), 2905-2917
Non-basal slip systems in HCP metals and alloys: source mechanisms
2001
MH Yoo, SR Agnew, JR Morris, KM Ho / Materials Science and Engineering: A 319, 87-92
Overview of fatigue performance of Cu processed by severe plastic deformation
1999
SR Agnew, AY Vinogradov, S Hashimoto, JR Weertman / Journal of Electronic Materials 28 (9), 1038-1044
Crystal plasticity-based forming limit prediction for non-cubic metals: application to Mg alloy AZ31B
2009
CJ Neil, SR Agnew / International Journal of Plasticity 25 (3), 379-398
Crystallographic texture evolution of three wrought magnesium alloys during equal channel angular extrusion
2005
SR Agnew, P Mehrotra, TM Lillo, GM Stoica, PK Liaw / Materials Science and Engineering: A 408 (1-2), 72-78
Role of solute in the texture modification during hot deformation of Mg-rare earth alloys
2012
JP Hadorn, K Hantzsche, S Yi, J Bohlen, D Letzig, JA Wollmershauser, ... / Metallurgical and Materials Transactions A 43 (4), 1347-1362
The effect of twin–twin interactions on the nucleation and propagation of {101¯ 2} twinning in magnesium
2013
H El Kadiri, J Kapil, AL Oppedal, LG Hector Jr, SR Agnew, M Cherkaoui, ... / Acta Materialia 61 (10), 3549-3563
The effects of texture and extension twinning on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B
2010
L Wu, SR Agnew, Y Ren, DW Brown, B Clausen, GM Stoica, HR Wenk, ... / Materials Science and Engineering: A 527 (26), 7057-7067
Microstructure and mechanical behavior of nanocrystalline metals
2000
SR Agnew, BR Elliott, CJ Youngdahl, KJ Hemker, JR Weertman / Materials Science and Engineering: A 285 (1-2), 391-396
Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction
2010
CJ Neil, JA Wollmershauser, B Clausen, CN Tomé, SR Agnew / International Journal of Plasticity 26 (12), 1772-1791
A mechanistic understanding of the formability of magnesium: examining the role of temperature on the deformation mechanisms
2003
SR Agnew, O Duygulu / Materials Science Forum 419, 177-188
Wrought magnesium: a 21st century outlook
2004
SR Agnew / Jom 56 (5), 20-21
In situ neutron diffraction and polycrystal plasticity modeling of a Mg–Y–Nd–Zr alloy: effects of precipitation on individual deformation mechanisms
2013
SR Agnew, RP Mulay, FJ Polesak Iii, CA Calhoun, JJ Bhattacharyya, ... / Acta Materialia 61 (10), 3769-3780
Twinning and detwinning during cyclic deformation of Mg alloy AZ31B
2007
DW Brown, A Jain, SR Agnew, B Clausen / Materials science forum 539, 3407-3413
Mg sheet metal forming: Lessons learned from deep drawing Li and Y solid-solution alloys
2006
SR Agnew, JW Senn, JA Horton / Jom 58 (5), 62-69
Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading
2015
H Qiao, SR Agnew, PD Wu / International Journal of Plasticity 65, 61-84
The influence of texture on the elastic properties of ultrafine-grain copper
1998
SR Agnew, JR Weertman / Materials Science and Engineering: A 242 (1-2), 174-180
Effects of solute and second-phase particles on the texture of Nd-containing Mg alloys
2012
JP Hadorn, K Hantzsche, S Yi, J Bohlen, D Letzig, SR Agnew / Metallurgical and Materials Transactions A 43 (4), 1363-1375
Texture enhancement during grain growth of magnesium alloy AZ31B
2015
JJ Bhattacharyya, SR Agnew, G Muralidharan / Acta Materialia 86, 80-94
Formability of a more randomly textured magnesium alloy sheet: Application of an improved warm sheet formability test
2010
CE Dreyer, WV Chiu, RH Wagoner, SR Agnew / Journal of Materials Processing Technology 210 (1), 37-47
Incorporation of solid solution alloying effects into polycrystal modeling of Mg alloys
2011
B Raeisinia, SR Agnew, A Akhtar / Metallurgical and Materials Transactions A 42 (5), 1418-1430
Using polycrystal plasticity modeling to determine the effects of grain size and solid solution additions on individual deformation mechanisms in cast Mg alloys
2010
B Raeisinia, SR Agnew / Scripta Materialia 63 (7), 731-736
Plastic anisotropy of magnesium alloy AZ 31 B sheet
2002
SR Agnew / Magnesium Technology 2002 as held at the 2002 TMS Annual Meeting, 169-174
Dislocation transmutation by tension twinning in magnesium alloy AZ31
2016
F Wang, SR Agnew / International Journal of Plasticity 81, 63-86
Environment-exposure-dependent fatigue crack growth kinetics for Al–Cu–Mg/Li
2007
YJ Ro, SR Agnew, GH Bray, RP Gangloff / Materials Science and Engineering: A 468, 88-97
Ductility enhancement of a heat-treatable magnesium alloy
2006
P Mehrotra, TM Lillo, SR Agnew / Scripta materialia 55 (10), 855-858
Gradient plasticity in gradient nano-grained metals
2016
Z Zeng, X Li, D Xu, L Lu, H Gao, T Zhu / Extreme Mechanics Letters 8, 213-219
Effect of the loading mode on the evolution of the deformation mechanisms in randomly textured magnesium polycrystals–comparison of experimental and modeling results
2015
K Máthis, G Csiszár, J Čapek, J Gubicza, B Clausen, P Lukáš, ... / International Journal of Plasticity 72, 127-150
Fatigue crack surface crystallography near crack initiating particle clusters in precipitation hardened legacy and modern Al–Zn–Mg–Cu alloys
2011
VK Gupta, SR Agnew / International journal of fatigue 33 (9), 1159-1174
Connections between the basal I1 “growth” fault and< c+ a> dislocations
2015
SR Agnew, L Capolungo, CA Calhoun / Acta Materialia 82, 255-265
Equal-channel angular extrusion of beryllium
2002
RD Field, CT Necker, KT Hartwig, JF Bingert, SR Agnew / Metallurgical and Materials Transactions A 33 (3), 965-972
The role of macroscopic hardening and individual length-scales on crack tip stress elevation from phenomenological strain gradient plasticity
2008
U Komaragiri, SR Agnew, RP Gangloff, MR Begley / Journal of the Mechanics and Physics of Solids 56 (12), 3527-3540
Environmental Fatigue-Crack Surface Crystallography for Al-Zn-Cu-Mg-Mn/Zr
2008
Y Ro, SR Agnew, RP Gangloff / Metallurgical and Materials Transactions A 39 (6), 1449
The relation between texture, twinning and mechanical properties in hexagonal aggregates
2002
CN Tomé, SR Agnew, WR Blumenthal, MAM Bourke, DW Brown, ... / Materials Science Forum 408, 263-268
Texture weakening effects in Ce-containing Mg alloys
2013
JP Hadorn, RP Mulay, K Hantzsche, S Yi, J Bohlen, D Letzig, SR Agnew / Metallurgical and Materials Transactions A 44 (3), 1566-1576
Demonstration of alloying, thermal activation, and latent hardening effects on quasi-static and dynamic polycrystal plasticity of Mg alloy, WE43-T5, plate
2016
JJ Bhattacharyya, F Wang, PD Wu, WR Whittington, H El Kadiri, ... / International Journal of Plasticity 81, 123-151
The origin and enhancement of {0001}< 112¯ 0> texture during heat treatment of rolled AZ31B magnesium alloys
2015
MA Steiner, JJ Bhattacharyya, SR Agnew / Acta Materialia 95, 443-455
Ultrasonic attenuation due to grain boundary scattering in pure niobium
2010
F Zeng, SR Agnew, B Raeisinia, GR Myneni / Journal of Nondestructive Evaluation 29 (2), 93-103
Crystallography of fatigue crack propagation in precipitation-hardened Al-Cu-Mg/Li
2007
Y Ro, SR Agnew, RP Gangloff / Metallurgical and Materials Transactions A 38 (12), 3042-3062
Fatigue-property enhancement of magnesium alloy, AZ31B, through equal-channel-angular pressing
2007
L Wu, GM Stoica, HH Liao, SR Agnew, EA Payzant, G Wang, DE Fielden, ... / Metallurgical and Materials Transactions A 38 (13), 2283-2289
The effect of temperature and strain rate on the tensile properties of textured magnesium alloy AZ31B sheet
2003
O Duygulu, SR Agnew / Magnesium Technology 237, 242
Uncertainty in the determination of fatigue crack facet crystallography
2005
YJ Ro, SR Agnew, RP Gangloff / Scripta Materialia 52 (6), 531-536
In situ neutron diffraction study of the plastic deformation mechanisms of B2 ordered intermetallic alloys: NiAl, CuZn, and CeAg
2009
JA Wollmershauser, S Kabra, SR Agnew / Acta Materialia 57 (1), 213-223
A slip system-based kinematic hardening model application to in situ neutron diffraction of cyclic deformation of austenitic stainless steel
2012
JA Wollmershauser, B Clausen, SR Agnew / International Journal of Fatigue 36 (1), 181-193
The low-temperature mechanical behavior of molybdenum-rhenium
2003
SR Agnew, T Leonhardt / JOM 55 (10), 25-29
Effect of precipitate shape and orientation on Orowan strengthening of non-basal slip modes in hexagonal crystals, application to magnesium alloys
2016
F Wang, JJ Bhattacharyya, SR Agnew / Materials Science and Engineering: A 666, 114-122
Forming behavior of magnesium sheet
2006
RH Wagoner, XY Lou, M Li, SR Agnew / Journal of materials processing technology 177 (1-3), 483-485
Tensile and compressive creep behavior of die cast magnesium alloy AM60B
2000
SR Agnew, KC Liu, EA Kenik, S Viswanathan / Magnesium Technology 2000, 285-290
Dynamic behavior of a rare-earth-containing Mg alloy, WE43B-T5, plate with comparison to conventional alloy, AM30-F
2014
S Agnew, W Whittington, A Oppedal, H El Kadiri, M Shaeffer, KT Ramesh, ... / Jom 66 (2), 277-290
In-situ measurement of internal strain evolution during deformation dominated by mechanical twinning
2002
SR Agnew, DW Brown, SC Vogel, TM Holden / Materials science forum 404, 747-752
On twinning and anisotropy in rolled Mg alloy AZ31 under uniaxial compression
2015
XQ Guo, A Chapuis, PD Wu, SR Agnew / International Journal of Solids and Structures 64, 42-50
Texture randomization of magnesium alloys containing rare earth elements
2008
JW Senn, SR Agnew / Magnesium Technology 2008, 153e158
Indexation and misorientation analysis of low-quality Laue diffraction patterns
2009
VK Gupta, SR Agnew / Journal of Applied Crystallography 42 (1), 116-124
Effect of aging on scale-dependent plasticity in aluminum alloy 2024
2006
YJ Ro, MR Begley, RP Gangloff, SR Agnew / Materials Science and Engineering: A 435, 333-342
Effect of low temperature on fatigue crack formation and microstructure-scale propagation in legacy and modern Al–Zn–Mg–Cu alloys
2013
JT Burns, VK Gupta, SR Agnew, RP Gangloff / International Journal of Fatigue 55, 268-275
Solidification behavior of commercial magnesium alloys
2001
Q Han, EA Kenik, SR Agnew, S Viswanathan / Magnesium Technology 2001, 81-86
Assessment of equal channel angular extrusion processing of magnesium alloys
2001
SR Agnew, TM Lillo, J Macheret, GM Stoica, L Chen, Y Lu, D Fielden, ... / Magnesium Technology 2001, 243-247
Nanocrystalline materials: fatigue
2014
AY Vinogradov, AYSR Agnew / Dekker Encyclopedia of Nanoscience and Nanotechnology, Seven Volume Set …
Mechanisms of ductility in CoTi and CoZr B2 intermetallics
2010
JA Wollmershauser, CJ Neil, SR Agnew / Metallurgical and Materials Transactions A 41 (5), 1217-1229
Effect of environment on fatigue crack wake dislocation structure in Al-Cu-Mg
2012
Y Ro, SR Agnew, RP Gangloff / Metallurgical and Materials Transactions A 43 (7), 2275-2292
Slip systems and dislocation densities in individual grains of polycrystalline aggregates of plastically deformed CoTi and CoZr alloys
2014
T Ungár, G Ribárik, G Zilahi, R Mulay, U Lienert, L Balogh, S Agnew / Acta Materialia 71, 264-282
A simple algorithm to eliminate ambiguities in EBSD orientation map visualization and analyses: application to fatigue crack-tips/wakes in aluminum alloys
2010
VK Gupta, SR Agnew / Microscopy and Microanalysis 16 (6), 831-841
On the rapid hardening and exhaustion of twinning in magnesium alloy
2017
PD Wu, XQ Guo, H Qiao, SR Agnew, DJ Lloyd, JD Embury / Acta Materialia 122, 369-377
Effect of extension 101-2 twins on texture evolution at elevated temperature deformation accompanied by dynamic recrystallization
2016
E Popova, AP Brahme, Y Staraselski, SR Agnew, RK Mishra, K Inal / Materials & Design 96, 446-457
Diffraction characterization of microstructure scale fatigue crack growth in a modern Al–Zn–Mg–Cu alloy
2012
VK Gupta, RP Gangloff, SR Agnew / International journal of fatigue 42, 131-146
The role of texture, temperature and strain rate in the activity of deformation twinning
2005
DW Brown, SR Agnew, SP Abeln, WR Blumenthal, MAM Bourke, ... / Materials Science Forum 495, 1037-1042
Deformation mechanisms of magnesium alloys
2012
SR Agnew / Advances in wrought magnesium alloys, 63-104
Predictive sensitization modeling for AA5XXX aluminum alloys including non-isothermal cases
2015
MA Steiner, SR Agnew / Corrosion 72 (2), 169-176
Modeling sensitization of Al–Mg alloys via β-phase precipitation kinetics
2015
MA Steiner, SR Agnew / Scripta Materialia 102, 55-58
A new metastable phase in dilute, hot-rolled Mg–Nd alloys
2012
JP Hadorn, SR Agnew / Materials Science and Engineering: A 533, 9-16
Magnesium technology 2011
2016
W Sillekens, S Agnew, N Neelameggham, S Mathaudhu / Springer
Investigation of the effect of thermal residual stresses on deformation of α-uranium through neutron diffraction measurements and crystal plasticity modeling
2015
CA Calhoun, E Garlea, RP Mulay, TA Sisneros, SR Agnew / Acta Materialia 85, 168-179
Elasto‐Plastic Behavior of High RRR Niobium: Effects of Crystallographic Texture, Microstructure and Hydrogen Concentration
2003
GR Myneni, SR Agnew / AIP Conference Proceedings 671 (1), 227-242
Slip mode dependency of dislocation shearing and looping of precipitates in Mg alloy WE43
2018
JJ Bhattacharyya, F Wang, N Stanford, SR Agnew / Acta Materialia 146, 55-62
α-Phase transformation kinetics of U–8 wt% Mo established by in situ neutron diffraction
2016
MA Steiner, CA Calhoun, RW Klein, K An, E Garlea, SR Agnew / Journal of Nuclear Materials 477, 149-156
Plastic anisotropy of magnesium alloy AZ31B sheet
2016
SR Agnew / Essential Readings in Magnesium Technology, 351-356
Thermal residual strains in depleted α-U
2013
CA Calhoun, JA Wollmershauser, DW Brown, RP Mulay, E Garlea, ... / Scripta Materialia 69 (8), 566-569
In-situ neutron diffraction study of the Bauschinger effect in B2 structured CoZr
2011
RP Mulay, B Clausen, SR Agnew / Metallurgical and Materials Transactions A 42 (1), 60-70
High-strain-rate deformation of pure aluminum reinforced with 25% alumina submicron particles near the solidus temperature
1999
BQ Han, SR Agnew, DC Dunand / Scripta materialia 40 (7), 801-808
In-situ neutron diffraction of a quasicrystal-containing Mg alloy interpreted using a new polycrystal plasticity model of hardening due to {10.2} tensile twinning
2018
SR Agnew, A Singh, CA Calhoun, RP Mulay, JJ Bhattacharyya, ... / International Journal of Plasticity 100, 34-51
Monte Carlo modeling of recrystallization processes in α-uranium
2017
MA Steiner, RJ McCabe, E Garlea, SR Agnew / Journal of Nuclear Materials 492, 74-87
Acoustic harmonic generation from fatigue-generated dislocation substructures in copper single crystals
2013
TM Apple, JH Cantrell, CM Amaro, CR Mayer, WT Yost, SR Agnew, ... / Philosophical Magazine 93 (21), 2802-2825
Hard slip mechanisms in B2 CoTi
2012
RP Mulay, SR Agnew / Acta Materialia 60 (4), 1784-1794
Effect of twinning on the mechanical behavior of a magnesium alloy sheet during strain path changes.
2006
A Jain, SR Agnew / Magnesium Technology 2006, 219-224
Texture evolution during equal channel angular forging and dislocation boundary misorientations after severe plastic deformation
1998
SR Agnew, UF Kocks, KT Hartwig, JR Weertman / Nineteenth Riso International Symposium on Materials Science 1998, 201-206
Deformation and fracture behavior of Mg alloy, WE43, after various aging heat treatments
2017
JJ Bhattacharyya, F Wang, PJ McQuade, SR Agnew / Materials Science and Engineering: A 705, 79-88
Experiment-based modelling of grain boundary β-phase (Mg 2 Al 3) evolution during sensitisation of aluminium alloy AA5083
2017
R Zhang, MA Steiner, SR Agnew, SK Kairy, CHJ Davies, N Birbilis / Scientific reports 7 (1), 2961
A new empirical equation for termination of twinning in magnesium alloys
2016
H Qiao, PD Wu, XQ Guo, SR Agnew / Scripta Materialia 120, 71-75
Blind study of the effect of processing history on the constitutive behaviour of alloy AZ31B
2009
C Dreyer, F Polesak, T Shultz, S Agnew / Magnesium Technology, 491-496
Measuring the effect of environment on fatigue crack-wake plasticity in aluminum alloy 2024 using electron backscatter diffraction
2008
VK Gupta, SR Agnew / Materials Science and Engineering: A 494 (1-2), 36-46
TEM investigation of dislocation mechanisms in Mg alloy AZ31B sheet
2004
SR Agnew, O Duygulu / Mechanisms Technology, 61-66
Equal channel angular processing of magnesium alloys
2002
SR Agnew, GM Stoica, LJ Chen, TM Lillo, J Macheret, PK Liaw / Ultrafine Grained Materials II, 643-652
Tensile and Compressive Creep Behavior of Magnesium Die Casting Alloys Containing Aluminum
2000
SR Agnew, S Viswanathan, EA Payzant, Q Han, KC Liu, EA Kenik / Magnesium Alloys and their Applications, 685-692
Further characterization of the aluminum peroxide oxide, AlO2, formed by interfacial reaction between Pt and α-Al2O3
1995
YC Lu, S Agnew, R Dieckmann, SL Sass / Acta metallurgica et materialia 43 (5), 1885-1893
Surface preparation and bend ductility of nial
1993
JH Schneibel, SR Agnew, CA Carmichael / Metallurgical and Materials Transactions A 24 (11), 2593-2596
X-ray diffraction study of the phase purity, order and texture of ductile B2 intermetallics
2010
RP Mulay, JA Wollmershauser, MA Heisel, H Bei, AM Russell, SR Agnew / Acta Materialia 58 (7), 2788-2796
Characteristic dislocation substructure in 101¯ 2 twins in hexagonal metals
2018
F Wang, K Hazeli, KD Molodov, CD Barrett, T Al-Samman, DA Molodov, ... / Scripta Materialia 143, 81-85
Twin-induced hardening in extruded Mg alloy AM30
2017
H Qiao, XQ Guo, AL Oppedal, H El Kadiri, PD Wu, SR Agnew / Materials Science and Engineering: A 687, 17-27
Measuring and modeling the anisotropic, high strain rate deformation of Al alloy, 7085, plate in T711 temper
2017
JJ Bhattacharyya, SR Agnew, MM Lee, WR Whittington, H El Kadiri / International Journal of Plasticity 93, 46-63
Effects of laser ablation coating removal (LACR) on a steel substrate: Part 2: Residual stress and fatigue
2015
M Shamsujjoha, SR Agnew, JR Brooks, TJ Tyler, JM Fitz-Gerald / Surface and Coatings Technology 281, 206-214
Microstructure and ductility of Mg alloy, ZK 60, after equal channel angular processing.
2004
GM Stoica, SR Agnew, E Payzant / Ultrafine Grained Materials III(as held at the 2003 TMS Annual Meeting), 427-432
Texture analysis as a tool for wrought magnesium alloy development
2000
SR Agnew, MH Yoo, JA Horton / Magnesium Alloys and their Applications, 117-124
Effects of hydrogen on the mechanical response of α-uranium
2015
CA Calhoun, E Garlea, T Sisneros, SR Agnew / Journal of Nuclear Materials 465, 737-745
Dislocation-twin interactions in magnesium alloy AZ31
2015
F Wang, S Agnew / Magnesium Technology 2015, 139-144
The fracture behavior of B2 structured MgR intermetallics
2009
RP Mulay, SR Agnew / Scripta Materialia 61 (11), 1036-1039
Crystallographic texture of straight-rolled α-uranium foils via neutron and X-ray diffraction
2017
JR Einhorn, MA Steiner, SC Vogel, E Garlea, SR Agnew / Journal of Applied Crystallography 50 (3), 859-865
Effects of laser ablation coating removal (LACR) on a steel substrate: Part 1: Surface profile, microstructure, hardness, and adhesion
2015
M Shamsujjoha, SR Agnew, MA Melia, JR Brooks, TJ Tyler, ... / Surface and Coatings Technology 281, 193-205
Constitutive behavior of four wrought magnesium alloys under warm forming conditions
2008
SR Agnew, CE Dreyer, FJ Polesak III, WV Chiu, CJ Neil, M Rodriguez / Magnesium Technology, 159-164
Measuring the temperature dependence of the flow surface of magnesium alloy sheet
2005
A Jain, SR Agnew / Magnesium Technology 2005, 71-76
Ultrasonic velocity and texture of high RRR niobium
2003
SR Agnew, F Zeng, GR Myneni / Matériaux & Techniques 91 (7-8-9), 38-44
Structure and mechanical properties of nanocrystalline metals- with opportunities for modeling
1998
SR Agnew, BR Elliott, CJ Youngdahl, KJ Hemker, JR Weertman / Nineteenth Riso International Symposium on Materials Science 1998, 1-14
High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained
2018
M Shamsujjoha, SR Agnew, JM Fitz-Gerald, WR Moore, TA Newman / Metallurgical and Materials Transactions A 49 (7), 3011-3027
Modeling solute segregation during the solidification of γ-phase U-Mo alloys
2016
MA Steiner, E Garlea, SR Agnew / Journal of Nuclear Materials 474, 105-112
Crystal plasticity modeling of the dynamic behavior of magnesium alloy, WE43-T5, plate
2015
J Bhattacharyya, S Agnew, P Wu, W Wittington, H El Kadiri / Magnesium Technology 2015, 165-170
The Materials Genome Initiative at the National Science Foundation: A Status Report after the First Year of Funded Research
2014
K Feldman, SR Agnew / JOM 66 (3), 336
Hydrogen damage in the crack tip environment
2004
MR Begley, SR Agnew, U Komaragiri, RP Gangloff / Proceedings, International Congress on Fracture-i1, Elsevier Science, Oxford, UK
Temperature dependent elastic properties of γ-phase U–8 wt% Mo
2018
MA Steiner, E Garlea, J Creasy, A DeMint, SR Agnew / Journal of Nuclear Materials 500, 184-191
Microstructure characterization of large TiC-Mo-Ni cermet tiles
2017
SR Agnew, JI Keene, L Dong, M Shamsujjoha, RO Mark, HNG Wadley / International Journal of Refractory Metals and Hard Materials 68, 84-95
What is in A Strain Hardening “Plateau”?
2016
SR Agnew, CA Calhoun, JJ Bhattacharyya / Magnesium Technology 2016, 189-194
Exploration of thin-walled magnesium alloy tube extrusion for improved crash performance
2016
RW Klein, BW Williams, J McKinley, JR Einhorn, SR Agnew / Magnesium Technology 2016, 223-228
Texture evolution during grain growth of magnesium alloy AZ31B
2014
JJ Bhattacharyya, B Radhakrishnan, G Muralidharan, SR Agnew / Magnesium Technology 2014, 233-238
In-situ Neutron diffraction study of aging in alloy ZK60A
2014
SR Agnew, CA Calhoun, B Clausen / Magnesium Technology 2014, 389-394
Deformation of O-temper AZ 31 B Mg sheet under monotonic and cyclic loading.
2006
X Lou, M Li, RK Boger, SR Agnew, RH Wagoner / Magnesium Technology 2006, 159-164
Fatigue Crack Tip Damage-Based Models in Structural Prognosis
2004
SR Agnew, YJ Ro, MR Begley, RP Gangloff / Proceedings, International Congress on Fracture-11, Elsevier Science, Oxford, UK
Plasma Arc Lamp Processing of Magnesium Alloy Sheet
2003
JA Horton, CA Blue, SR Agnew / Magnesium Technology 2003, 243-247
Measurement and simulation of plastic anisotropy in magnesium alloy AZ 31 B sheet
2001
SR Agnew / Modelling the Performance of Engineering Structural Materials II(as held at …
Mechanical properties of large TiC-Mo-Ni cermet tiles
2018
SR Agnew, L Dong, JI Keene, HNG Wadley / International Journal of Refractory Metals and Hard Materials 75, 238-247
Transmutation of Basal Dislocations by  Twinning in Magnesium
2017
C Barrett, F Wang, S Agnew, H El Kadiri / Magnesium Technology 2017, 147-152
Measuring and Modeling the Effects of Mechanical Twinning on the Behavior of Magnesium Alloys
2015
S Agnew, P Wu, K Inal, H El Kadiri, J Wang, C Tome / Magnesium Technology 2015, 15-17
In-Situ Neutron Diffraction Study of the Deformation Mechanisms in Solutionized Mg-Zn Alloys
2015
RP Mulay, SR Agnew, CH Caceres / Magnesium Technology 2015, 97-102
Development of Thin-Walled Magnesium Alloy Extrusions for Improved Crash Performance Based Upon Texture Control
2015
BW Williams, SR Agnew, RW Klein, J McKinley / Magnesium Technology 2015, 203-208
A simple algorithm to eliminate ambiguities in EBSD orientation map visualization and analyses: Application to fatigue cracks in aluminum alloys
2010
VK Gupta, SR Agnew / Microscopy and Microanalysis 16 (S2), 1248-1249
Extracting post-uniform constitutive behavior from high temperature tensile test data
2010
C Dreyer, L Hector, S Agnew / Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …
Constitutive Modeling of Slip, Twinning, and Untwinning in HCP Alloys
2008
M Li, XY Lou, SR Agnew, RH Wagoner / Mechanical Properties and Numerical Simulations of Friction Stir Welded TWB …
Infrared processing of magnesium wrought alloys
2005
JA Horton, CA Blue, T Muth, AL Bowles, SR Agnew / Magnesium Technology, 155-158
Forging of Magnesium Alloys
2005
PK Chaudhury, SR Agnew / ASM Handbook, Vol. 14 A, Metalworking: Bulk Forming 14, 318-323
Mg17Al12 Phase Precipitation Kinetics in Die Casting Alloys AZ91D and AM60B
2001
EA Payzant, SR Agnew, Q Han, S Viswanathan / Magnesium Technology 2001, 183-187
Deformation characteristics of Al and Mg alloys subjected to equal channel angular processing
2001
GM Stoica, LJ Chen, EA Payzant, SR Agnew, YL Lu, BQ Han, ... / TMS
EQUAL CHANNEL ANGULAR EXTRUSION (ECAE) OF BERYLLIUM.
2001
RD Field, KT Hartwig, CT Necker, JF Bingert, SR Agnew / Los Alamos National Laboratory
Using Deformation‐Induced Texture as an Alloy/Process Optimization Tool
2000
SR Agnew, MH Yoo / Magnesium Technology 2000, 331-339
Texture Development During Equal Channel Angular Forging of BCC Metals
1999
SR Agnew / Oak Ridge National Lab., TN (US)
An assessment of severe plastic deformation for producing submicrocrystalline copper
1998
SR Agnew 
Origins of high strength and ductility combination in a Guinier-Preston zone containing Mg-Al-Ca-Mn alloy
2019
JJ Bhattacharyya, T Nakata, S Kamado, SR Agnew / Scripta Materialia 163, 121-124
Dislocation induced twin growth and formation of basal stacking faults in {101¯ 2} twins in pure Mg
2019
F Wang, CD Barrett, RJ McCabe, H El Kadiri, L Capolungo, SR Agnew / Acta Materialia 165, 471-485
Heat Treatment Strategies to Improve the Quasi-Static and Dynamic Performance of Alpha+ Beta Titanium Alloys
2019
AF Boostani, S Mujahid, AL Oppedal, C Krivanec, WR Whittington, ... / TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 1383-1387
Charpy Impact Energy Values for Submerged Arc Welding of ASTM A709 50CR (UNS S41003) using Austenitic Welding Wires
2019
X Xia, RM Dubas, JM Fitz-Gerald, SR Agnew, SR Sharp, J Provines / Transportation Research Board 98th Annual MeetingTransportation Research Board
Assessing the Impact of Texture and Its Gradients on the Forming Limits of an AA6xxx Sheet Alloy
2019
JJ Bhattacharyya, N Peterson, F Sen, R Burrows, D Anderson, ... / Light Metals 2019, 1515-1523
Thermally Activated Slip in Rare Earth Containing Mg–Mn–Ce Alloy, ME10, Compared with Traditional Mg–Al–Zn Alloy, AZ31
2019
V Bajikar, JJ Bhattacharyya, N Peterson, SR Agnew / Magnesium Technology 2019, 21-22
Integrated Computational Materials Engineering of Magnesium
2018
VM Miller, SR Agnew / JOM 70 (10), 2296-2297
The role of ternary alloying elements in eutectoid transformation of U10Mo alloy part I. Microstructure evolution during arc melting and subsequent homogenization annealing in …
2018
S Jana, L Sweet, D Neal, A Schemer-Kohrn, C Lavender, V Joshi / Journal of Nuclear Materials 509, 318-329
In-situ neutron diffraction characterization of temperature dependence deformation in α-uranium
2018
CA Calhoun, E Garlea, TA Sisneros, SR Agnew / Journal of Nuclear Materials 502, 60-67
The effect of precipitate-induced backstresses on plastic anisotropy: Demonstrated by modeling the behavior of aluminum alloy, 7085
2018
JJ Bhattacharyya, B Bittmann, SR Agnew / International Journal of Plasticity
Corrosion of Magnesium in Multimaterial System
2017
VV Joshi, S Agnew / JOM 69 (11), 2320-2321
Efficient rolling texture predictions and texture-sensitive thermomechanical properties of α-uranium foils
2017
MA Steiner, RW Klein, CA Calhoun, M Knezevic, E Garlea, SR Agnew / Journal of Nuclear Materials 495, 234-243
Path length dependent neutron diffraction peak shifts observed during residual strain measurements in U–8 wt% Mo castings
2017
MA Steiner, JR Bunn, JR Einhorn, E Garlea, EA Payzant, SR Agnew / Journal of Applied Crystallography 50 (3), 851-858
Crystal Plasticity Analysis of Compressive Loading Behavior of Extruded LPSO-type Ng-Zn-Y alloy
2017
T Mayama, YQ Chi, G Garces, JR Einhorn, SR Agnew / 대한기계학회 춘추학술대회, 54-55
International Journal of Refractory Metals & Hard Materials
2017
SR Agnew, JI Keene, L Dong, M Shamsujjoha, MR O'Masta, HNG Wadley / International Journal of Refractory Metals & Hard Materials 68, 84-95
Using the Crystal Plasticity Approach to Parse the Effects of Alloying and Aging on the Mechanical Behavior of Wrought Mg Alloys
2017
SR Agnew, JJ Bhattacharyya, F Wang, PJ McQuade / Magnesium Technology 2017, 13-15
The Effect of  Twin Boundary on the Evolution of Defect Substructure
2017
F Wang, CD Barrett, K Hazeli, KD Molodov, T Al-Samman, A Oppedal, ... / Magnesium Technology 2017, 175-180
The Relative Contributions of Deformation Modes to AZ31 Rolling Textures in Different Temperature Regimes
2017
MA Steiner, JJ Bhattacharyya, SR Agnew / Magnesium Technology 2017, 555-561
Portable Optical Profilometer Device, System and Method
2016
WL Suhring, JM Fitz-Gerald, R Klein, SR Agnew, ST Acton / US Patent App. 14/835,387
Constructing portable depth from defocus optical profilometers for surface roughness evaluation
2015
R Klein, M Steiner, W Suhring, S Agnew, J Fitz-Gerald / Surface Topography: Metrology and Properties 3 (1), 015005
Why do Magnesium Alloys Develop Sharp Textures Upon Dynamic Recrystallization?
2015
H El Kadiri, CD Barrett, A Imandoust, SR Agnew, M Cherkaoui, K Inal / Magnesium Technology 2015, 159-163
Texture Evolution During Grain Growth of Magnesium Alloy AZ31B
2014
B Radhakrishnan, G Muralidharan, SR Agnew, J Bhattacharya / Oak Ridge National Lab.(ORNL), Oak Ridge, TN (United States)
Foreword. Symposium on Phase Transformations and Deformation in Magnesium Alloys
2013
JF Nie, S Agnew, S Mathaudhu / Metallurgical and Materials Transactions A 44, 2917-2917
In-Situ Neutron Diffraction Study of Aging of a Mg-Y-Nd-Zr Alloy (WE43): Effects of Precipitation on Individual Deformation Mechanisms
2012
SR Agnew, FJ Polesak III, B Clausen / VIRGINIA UNIV CHARLOTTESVILLE DEPT OF MATERIALS SCIENCE AND ENGINEERING
Phase Transformations and Deformation in Magnesium Alloys
2012
S Agnew / JOM 64 (6), 623
In-situ neutron diffrraction study of aging of a Mg-6-N3-Zr alloy (WE43): effects of precipitation on individual deformation mechanisms
2012
B Clausen, SA Agnew, FJ Polesak / Los Alamos National Lab.(LANL), Los Alamos, NM (United States)
Deformation and Fracture Behavior of Magnesium Alloy WE 43 at Temperatures and Strain Rates Relevant to Deformation Processing
2012
S Agnew, F Polesak / AIP Conference Proceedings
Deformation Mechanisms in B 2 Intermetallic CoTi
2012
R Mulay, S Agnew / AIP Conference Proceedings
A Study of the Deformation Modes in B 2 Intermetallics CoTi and CoZr Using In-Situ Neutron Diffraction and Electron Backscattered Diffraction
2011
R Mulay, S Agnew / Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …
The Bauschinger Effect in Austenitic(317 L) Stainless Steel: Validating a Slip-System Based Non-Linear Kinematic Hardening Model with In-Situ Neutron Diffraction
2011
J Wollmershauser, B Clausen, C Tome, S Agnew / Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …
Application of a Finite Strain Elastic-Plastic Self-Consistent Model to Deformation of Magnesium
2011
B Clausen, DW Brown, CN Tomé, CJ Neil, JA Wollmershauser, ... / Engineering Applications of Residual Stress, Volume 8, 33-34
Hot Workability of Alloy WE43 Examined using Hot Torsion Testing
2011
FJ Polesak, B Davis, R DeLorme, SR Agnew / Magnesium Technology 2011, 379-384
Assessing and Modeling the Impact of Initial Microstructure on Dynamic Recrystallization of Sheets
2010
F Polesak, P Krajewski, B Raeisinia, S Agnew / Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …
Neutron Diffraction and EPSC Modeling
2010
B Clausen, D Brown, C Tome, L Capolungo, S Agnew / Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …
In-Situ Neutron Diffraction study of B 2 CoTi and CoZr
2010
R Mulay, J Wollmershauser, S Agnew / Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …
Preface| Materials Science and Engineering: A-Volume 494, Issues 1–2
2008
SR Agnew / Materials Science and Engineering: A 494 (1-2), 1-2
Special issue section: Advances in Microstructure-based Modeling and Characterization of Deformation Microstructures held at the TMS Annual Meeting 2007 in Orlando, Florida Preface
2008
SR Agnew / MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES …
D-55 Invited—In Situ Neutron Diffraction During Cyclic Deformation: Studying the Reversibility of Deformation Induced Twinning and Phase Transformation
2007
SR Agnew, A Jain, DW Brown, B Clausen, R Vaidyanathan, S Qui / Powder Diffraction 22 (2), 182-182
Niobium Specifications and Performance of SRF Cavities
2007
GR Myneni, P Kneisel, T Carneiro, R Ricker, T G-Herold, F Stevie, ... / Thomas Jefferson National Accelerator Facility, Newport News, VA
Recent progress in large grain/single crystal high RRR niobium
2005
GR Myneni, P Kneisel, T Carneiro, SR Agnew, F Stevie / TJNAF (Thomas Jefferson National Accelerator Facility, Newport News, VA)
Forging of Magnesium Alloys
2005
SR Agnew
MAGNESIUM: WROUGHT ALLOYS AND PROCESSES-Wrought Magnesium: A 21st Century Outlook
2004
SR Agnew / JOM-Journal of the Minerals Metals and Materials Society 56 (5), 20-21
Development of texture during deformation of hexagonal close packed metals.
2002
DW Brown, SR Agnew, WR Blumenthal, TM Holden, CN Tomé, ... / Los Alamos National Laboratory
Experimental and Computational Study of Bolt Load Retention Behavior of Magnesium Alloy AM60B
2001
C Temmel, KC Liu, SR Agnew, AS Sabau, Q Han, S Viswanathan / Magnesium Technology 2001, 201-201
Adams, JM, Catchen, GL, Loubychev, D., Fu, J., Miller, DL,“A Novel Apparatus for Performing Perturbed Angular Correlation Spectroscopy Measurements on Epitaxially-Grown III-V …
1998
M Agamalian, DK Christen, AR Drews, CJ Glinka, H Matsouka, ... / Electrochem. Soc 145, 2377
5097-FATIGUE CARCK TIP DAMAGE-BASED MODELS IN STRUCTURAL PROGNOSIS
 
SR Agnew, YJ Ro, MR Begley, RP Gangloff / ICF11, Italy 2005
5505-HYDROGEN DAMAGE IN THE CRACK TIP ENVIRONMENT
 
MR Begley, SR Agnew, U Komaragiri, RP Gangloff / ICF11, Italy 2005
journal homepage: www. elsevier. com/locate/ijplas
 
SR Agnew, S Ankem, T Ao, J Asay, JR Asay, B Bacroix, OM Barabash, …