Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B | 2005 |
| SR Agnew, Ö Duygulu / International Journal of plasticity 21 (6), 1161-1193 |
Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y | 2001 |
| SR Agnew, MH Yoo, CN Tome / Acta Materialia 49 (20), 4277-4289 |
The texture and anisotropy of magnesium–zinc–rare earth alloy sheets | 2007 |
| J Bohlen, MR Nürnberg, JW Senn, D Letzig, SR Agnew / Acta Materialia 55 (6), 2101-2112 |
Hardening evolution of AZ31B Mg sheet | 2007 |
| XY Lou, M Li, RK Boger, SR Agnew, RH Wagoner / International Journal of Plasticity 23 (1), 44-86 |
Enhanced ductility in strongly textured magnesium produced by equal channel angular processing | 2004 |
| SR Agnew, JA Horton, TM Lillo, DW Brown / Scripta Materialia 50 (3), 377-381 |
Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling | 2003 |
| SR Agnew, CN Tomé, DW Brown, TM Holden, SC Vogel / Scripta Materialia 48 (8), 1003-1008 |
Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31 | 2009 |
| G Proust, CN Tomé, A Jain, SR Agnew / International Journal of Plasticity 25 (5), 861-880 |
Internal strain and texture evolution during deformation twinning in magnesium | 2005 |
| DW Brown, SR Agnew, MAM Bourke, TM Holden, SC Vogel, CN Tomé / Materials Science and Engineering: A 399 (1-2), 1-12 |
Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet | 2007 |
| A Jain, SR Agnew / Materials Science and Engineering: A 462 (1-2), 29-36 |
Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A | 2008 |
| L Wu, A Jain, DW Brown, GM Stoica, SR Agnew, B Clausen, DE Fielden, ... / Acta Materialia 56 (4), 688-695 |
Reorientation and stress relaxation due to twinning: modeling and experimental characterization for Mg | 2008 |
| B Clausen, CN Tomé, DW Brown, SR Agnew / Acta Materialia 56 (11), 2456-2468 |
Validating a polycrystal model for the elastoplastic response of magnesium alloy AZ31 using in situ neutron diffraction | 2006 |
| SR Agnew, DW Brown, CN Tomé / Acta materialia 54 (18), 4841-4852 |
Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion: Experiments and simulations | 2005 |
| SR Agnew, P Mehrotra, TM Lillo, GM Stoica, PK Liaw / Acta Materialia 53 (11), 3135-3146 |
Cyclic softening of ultrafine grain copper | 1998 |
| SR Agnew, JR Weertman / Materials Science and Engineering: A 244 (2), 145-153 |
Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet | 2008 |
| A Jain, O Duygulu, DW Brown, CN Tomé, SR Agnew / Materials Science and Engineering: A 486 (1-2), 545-555 |
Nonbasal deformation modes of HCP metals and alloys: role of dislocation source and mobility | 2002 |
| MH Yoo, JR Morris, KM Ho, SR Agnew / Metallurgical and Materials Transactions A 33 (3), 813-822 |
Transmission electron microscopy investigation of <c+a> dislocations in Mg and α-solid solution Mg-Li alloys | 2002 |
| SR Agnew, JA Horton, MH Yoo / Metallurgical and Materials Transactions A 33 (3), 851-858 |
Preface to the viewpoint set on: The current state of magnesium alloy science and technology | 2010 |
| SR Agnew / Scripta Materialia 63 (7), 671-673 |
Internal stress relaxation and load redistribution during the twinning–detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A | 2008 |
| L Wu, SR Agnew, DW Brown, GM Stoica, B Clausen, A Jain, DE Fielden, ... / Acta Materialia 56 (14), 3699-3707 |
Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet | 2010 |
| H Wang, B Raeisinia, PD Wu, SR Agnew, CN Tomé / International Journal of Solids and Structures 47 (21), 2905-2917 |
Non-basal slip systems in HCP metals and alloys: source mechanisms | 2001 |
| MH Yoo, SR Agnew, JR Morris, KM Ho / Materials Science and Engineering: A 319, 87-92 |
Overview of fatigue performance of Cu processed by severe plastic deformation | 1999 |
| SR Agnew, AY Vinogradov, S Hashimoto, JR Weertman / Journal of Electronic Materials 28 (9), 1038-1044 |
Crystal plasticity-based forming limit prediction for non-cubic metals: application to Mg alloy AZ31B | 2009 |
| CJ Neil, SR Agnew / International Journal of Plasticity 25 (3), 379-398 |
Crystallographic texture evolution of three wrought magnesium alloys during equal channel angular extrusion | 2005 |
| SR Agnew, P Mehrotra, TM Lillo, GM Stoica, PK Liaw / Materials Science and Engineering: A 408 (1-2), 72-78 |
Role of solute in the texture modification during hot deformation of Mg-rare earth alloys | 2012 |
| JP Hadorn, K Hantzsche, S Yi, J Bohlen, D Letzig, JA Wollmershauser, ... / Metallurgical and Materials Transactions A 43 (4), 1347-1362 |
The effect of twin–twin interactions on the nucleation and propagation of {101¯ 2} twinning in magnesium | 2013 |
| H El Kadiri, J Kapil, AL Oppedal, LG Hector Jr, SR Agnew, M Cherkaoui, ... / Acta Materialia 61 (10), 3549-3563 |
The effects of texture and extension twinning on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B | 2010 |
| L Wu, SR Agnew, Y Ren, DW Brown, B Clausen, GM Stoica, HR Wenk, ... / Materials Science and Engineering: A 527 (26), 7057-7067 |
Microstructure and mechanical behavior of nanocrystalline metals | 2000 |
| SR Agnew, BR Elliott, CJ Youngdahl, KJ Hemker, JR Weertman / Materials Science and Engineering: A 285 (1-2), 391-396 |
Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction | 2010 |
| CJ Neil, JA Wollmershauser, B Clausen, CN Tomé, SR Agnew / International Journal of Plasticity 26 (12), 1772-1791 |
A mechanistic understanding of the formability of magnesium: examining the role of temperature on the deformation mechanisms | 2003 |
| SR Agnew, O Duygulu / Materials Science Forum 419, 177-188 |
Wrought magnesium: a 21st century outlook | 2004 |
| SR Agnew / Jom 56 (5), 20-21 |
In situ neutron diffraction and polycrystal plasticity modeling of a Mg–Y–Nd–Zr alloy: effects of precipitation on individual deformation mechanisms | 2013 |
| SR Agnew, RP Mulay, FJ Polesak Iii, CA Calhoun, JJ Bhattacharyya, ... / Acta Materialia 61 (10), 3769-3780 |
Twinning and detwinning during cyclic deformation of Mg alloy AZ31B | 2007 |
| DW Brown, A Jain, SR Agnew, B Clausen / Materials science forum 539, 3407-3413 |
Mg sheet metal forming: Lessons learned from deep drawing Li and Y solid-solution alloys | 2006 |
| SR Agnew, JW Senn, JA Horton / Jom 58 (5), 62-69 |
Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading | 2015 |
| H Qiao, SR Agnew, PD Wu / International Journal of Plasticity 65, 61-84 |
The influence of texture on the elastic properties of ultrafine-grain copper | 1998 |
| SR Agnew, JR Weertman / Materials Science and Engineering: A 242 (1-2), 174-180 |
Effects of solute and second-phase particles on the texture of Nd-containing Mg alloys | 2012 |
| JP Hadorn, K Hantzsche, S Yi, J Bohlen, D Letzig, SR Agnew / Metallurgical and Materials Transactions A 43 (4), 1363-1375 |
Texture enhancement during grain growth of magnesium alloy AZ31B | 2015 |
| JJ Bhattacharyya, SR Agnew, G Muralidharan / Acta Materialia 86, 80-94 |
Formability of a more randomly textured magnesium alloy sheet: Application of an improved warm sheet formability test | 2010 |
| CE Dreyer, WV Chiu, RH Wagoner, SR Agnew / Journal of Materials Processing Technology 210 (1), 37-47 |
Incorporation of solid solution alloying effects into polycrystal modeling of Mg alloys | 2011 |
| B Raeisinia, SR Agnew, A Akhtar / Metallurgical and Materials Transactions A 42 (5), 1418-1430 |
Using polycrystal plasticity modeling to determine the effects of grain size and solid solution additions on individual deformation mechanisms in cast Mg alloys | 2010 |
| B Raeisinia, SR Agnew / Scripta Materialia 63 (7), 731-736 |
Plastic anisotropy of magnesium alloy AZ 31 B sheet | 2002 |
| SR Agnew / Magnesium Technology 2002 as held at the 2002 TMS Annual Meeting, 169-174 |
Dislocation transmutation by tension twinning in magnesium alloy AZ31 | 2016 |
| F Wang, SR Agnew / International Journal of Plasticity 81, 63-86 |
Environment-exposure-dependent fatigue crack growth kinetics for Al–Cu–Mg/Li | 2007 |
| YJ Ro, SR Agnew, GH Bray, RP Gangloff / Materials Science and Engineering: A 468, 88-97 |
Ductility enhancement of a heat-treatable magnesium alloy | 2006 |
| P Mehrotra, TM Lillo, SR Agnew / Scripta materialia 55 (10), 855-858 |
Gradient plasticity in gradient nano-grained metals | 2016 |
| Z Zeng, X Li, D Xu, L Lu, H Gao, T Zhu / Extreme Mechanics Letters 8, 213-219 |
Effect of the loading mode on the evolution of the deformation mechanisms in randomly textured magnesium polycrystals–comparison of experimental and modeling results | 2015 |
| K Máthis, G Csiszár, J Čapek, J Gubicza, B Clausen, P Lukáš, ... / International Journal of Plasticity 72, 127-150 |
Fatigue crack surface crystallography near crack initiating particle clusters in precipitation hardened legacy and modern Al–Zn–Mg–Cu alloys | 2011 |
| VK Gupta, SR Agnew / International journal of fatigue 33 (9), 1159-1174 |
Connections between the basal I1 “growth” fault and< c+ a> dislocations | 2015 |
| SR Agnew, L Capolungo, CA Calhoun / Acta Materialia 82, 255-265 |
Equal-channel angular extrusion of beryllium | 2002 |
| RD Field, CT Necker, KT Hartwig, JF Bingert, SR Agnew / Metallurgical and Materials Transactions A 33 (3), 965-972 |
The role of macroscopic hardening and individual length-scales on crack tip stress elevation from phenomenological strain gradient plasticity | 2008 |
| U Komaragiri, SR Agnew, RP Gangloff, MR Begley / Journal of the Mechanics and Physics of Solids 56 (12), 3527-3540 |
Environmental Fatigue-Crack Surface Crystallography for Al-Zn-Cu-Mg-Mn/Zr | 2008 |
| Y Ro, SR Agnew, RP Gangloff / Metallurgical and Materials Transactions A 39 (6), 1449 |
The relation between texture, twinning and mechanical properties in hexagonal aggregates | 2002 |
| CN Tomé, SR Agnew, WR Blumenthal, MAM Bourke, DW Brown, ... / Materials Science Forum 408, 263-268 |
Texture weakening effects in Ce-containing Mg alloys | 2013 |
| JP Hadorn, RP Mulay, K Hantzsche, S Yi, J Bohlen, D Letzig, SR Agnew / Metallurgical and Materials Transactions A 44 (3), 1566-1576 |
Demonstration of alloying, thermal activation, and latent hardening effects on quasi-static and dynamic polycrystal plasticity of Mg alloy, WE43-T5, plate | 2016 |
| JJ Bhattacharyya, F Wang, PD Wu, WR Whittington, H El Kadiri, ... / International Journal of Plasticity 81, 123-151 |
The origin and enhancement of {0001}< 112¯ 0> texture during heat treatment of rolled AZ31B magnesium alloys | 2015 |
| MA Steiner, JJ Bhattacharyya, SR Agnew / Acta Materialia 95, 443-455 |
Ultrasonic attenuation due to grain boundary scattering in pure niobium | 2010 |
| F Zeng, SR Agnew, B Raeisinia, GR Myneni / Journal of Nondestructive Evaluation 29 (2), 93-103 |
Crystallography of fatigue crack propagation in precipitation-hardened Al-Cu-Mg/Li | 2007 |
| Y Ro, SR Agnew, RP Gangloff / Metallurgical and Materials Transactions A 38 (12), 3042-3062 |
Fatigue-property enhancement of magnesium alloy, AZ31B, through equal-channel-angular pressing | 2007 |
| L Wu, GM Stoica, HH Liao, SR Agnew, EA Payzant, G Wang, DE Fielden, ... / Metallurgical and Materials Transactions A 38 (13), 2283-2289 |
The effect of temperature and strain rate on the tensile properties of textured magnesium alloy AZ31B sheet | 2003 |
| O Duygulu, SR Agnew / Magnesium Technology 237, 242 |
Uncertainty in the determination of fatigue crack facet crystallography | 2005 |
| YJ Ro, SR Agnew, RP Gangloff / Scripta Materialia 52 (6), 531-536 |
In situ neutron diffraction study of the plastic deformation mechanisms of B2 ordered intermetallic alloys: NiAl, CuZn, and CeAg | 2009 |
| JA Wollmershauser, S Kabra, SR Agnew / Acta Materialia 57 (1), 213-223 |
A slip system-based kinematic hardening model application to in situ neutron diffraction of cyclic deformation of austenitic stainless steel | 2012 |
| JA Wollmershauser, B Clausen, SR Agnew / International Journal of Fatigue 36 (1), 181-193 |
The low-temperature mechanical behavior of molybdenum-rhenium | 2003 |
| SR Agnew, T Leonhardt / JOM 55 (10), 25-29 |
Effect of precipitate shape and orientation on Orowan strengthening of non-basal slip modes in hexagonal crystals, application to magnesium alloys | 2016 |
| F Wang, JJ Bhattacharyya, SR Agnew / Materials Science and Engineering: A 666, 114-122 |
Forming behavior of magnesium sheet | 2006 |
| RH Wagoner, XY Lou, M Li, SR Agnew / Journal of materials processing technology 177 (1-3), 483-485 |
Tensile and compressive creep behavior of die cast magnesium alloy AM60B | 2000 |
| SR Agnew, KC Liu, EA Kenik, S Viswanathan / Magnesium Technology 2000, 285-290 |
Dynamic behavior of a rare-earth-containing Mg alloy, WE43B-T5, plate with comparison to conventional alloy, AM30-F | 2014 |
| S Agnew, W Whittington, A Oppedal, H El Kadiri, M Shaeffer, KT Ramesh, ... / Jom 66 (2), 277-290 |
In-situ measurement of internal strain evolution during deformation dominated by mechanical twinning | 2002 |
| SR Agnew, DW Brown, SC Vogel, TM Holden / Materials science forum 404, 747-752 |
On twinning and anisotropy in rolled Mg alloy AZ31 under uniaxial compression | 2015 |
| XQ Guo, A Chapuis, PD Wu, SR Agnew / International Journal of Solids and Structures 64, 42-50 |
Texture randomization of magnesium alloys containing rare earth elements | 2008 |
| JW Senn, SR Agnew / Magnesium Technology 2008, 153e158 |
Indexation and misorientation analysis of low-quality Laue diffraction patterns | 2009 |
| VK Gupta, SR Agnew / Journal of Applied Crystallography 42 (1), 116-124 |
Effect of aging on scale-dependent plasticity in aluminum alloy 2024 | 2006 |
| YJ Ro, MR Begley, RP Gangloff, SR Agnew / Materials Science and Engineering: A 435, 333-342 |
Effect of low temperature on fatigue crack formation and microstructure-scale propagation in legacy and modern Al–Zn–Mg–Cu alloys | 2013 |
| JT Burns, VK Gupta, SR Agnew, RP Gangloff / International Journal of Fatigue 55, 268-275 |
Solidification behavior of commercial magnesium alloys | 2001 |
| Q Han, EA Kenik, SR Agnew, S Viswanathan / Magnesium Technology 2001, 81-86 |
Assessment of equal channel angular extrusion processing of magnesium alloys | 2001 |
| SR Agnew, TM Lillo, J Macheret, GM Stoica, L Chen, Y Lu, D Fielden, ... / Magnesium Technology 2001, 243-247 |
Nanocrystalline materials: fatigue | 2014 |
| AY Vinogradov, AYSR Agnew / Dekker Encyclopedia of Nanoscience and Nanotechnology, Seven Volume Set … |
Mechanisms of ductility in CoTi and CoZr B2 intermetallics | 2010 |
| JA Wollmershauser, CJ Neil, SR Agnew / Metallurgical and Materials Transactions A 41 (5), 1217-1229 |
Effect of environment on fatigue crack wake dislocation structure in Al-Cu-Mg | 2012 |
| Y Ro, SR Agnew, RP Gangloff / Metallurgical and Materials Transactions A 43 (7), 2275-2292 |
Slip systems and dislocation densities in individual grains of polycrystalline aggregates of plastically deformed CoTi and CoZr alloys | 2014 |
| T Ungár, G Ribárik, G Zilahi, R Mulay, U Lienert, L Balogh, S Agnew / Acta Materialia 71, 264-282 |
A simple algorithm to eliminate ambiguities in EBSD orientation map visualization and analyses: application to fatigue crack-tips/wakes in aluminum alloys | 2010 |
| VK Gupta, SR Agnew / Microscopy and Microanalysis 16 (6), 831-841 |
On the rapid hardening and exhaustion of twinning in magnesium alloy | 2017 |
| PD Wu, XQ Guo, H Qiao, SR Agnew, DJ Lloyd, JD Embury / Acta Materialia 122, 369-377 |
Effect of extension 101-2 twins on texture evolution at elevated temperature deformation accompanied by dynamic recrystallization | 2016 |
| E Popova, AP Brahme, Y Staraselski, SR Agnew, RK Mishra, K Inal / Materials & Design 96, 446-457 |
Diffraction characterization of microstructure scale fatigue crack growth in a modern Al–Zn–Mg–Cu alloy | 2012 |
| VK Gupta, RP Gangloff, SR Agnew / International journal of fatigue 42, 131-146 |
The role of texture, temperature and strain rate in the activity of deformation twinning | 2005 |
| DW Brown, SR Agnew, SP Abeln, WR Blumenthal, MAM Bourke, ... / Materials Science Forum 495, 1037-1042 |
Deformation mechanisms of magnesium alloys | 2012 |
| SR Agnew / Advances in wrought magnesium alloys, 63-104 |
Predictive sensitization modeling for AA5XXX aluminum alloys including non-isothermal cases | 2015 |
| MA Steiner, SR Agnew / Corrosion 72 (2), 169-176 |
Modeling sensitization of Al–Mg alloys via β-phase precipitation kinetics | 2015 |
| MA Steiner, SR Agnew / Scripta Materialia 102, 55-58 |
A new metastable phase in dilute, hot-rolled Mg–Nd alloys | 2012 |
| JP Hadorn, SR Agnew / Materials Science and Engineering: A 533, 9-16 |
Magnesium technology 2011 | 2016 |
| W Sillekens, S Agnew, N Neelameggham, S Mathaudhu / Springer |
Investigation of the effect of thermal residual stresses on deformation of α-uranium through neutron diffraction measurements and crystal plasticity modeling | 2015 |
| CA Calhoun, E Garlea, RP Mulay, TA Sisneros, SR Agnew / Acta Materialia 85, 168-179 |
Elasto‐Plastic Behavior of High RRR Niobium: Effects of Crystallographic Texture, Microstructure and Hydrogen Concentration | 2003 |
| GR Myneni, SR Agnew / AIP Conference Proceedings 671 (1), 227-242 |
Slip mode dependency of dislocation shearing and looping of precipitates in Mg alloy WE43 | 2018 |
| JJ Bhattacharyya, F Wang, N Stanford, SR Agnew / Acta Materialia 146, 55-62 |
α-Phase transformation kinetics of U–8 wt% Mo established by in situ neutron diffraction | 2016 |
| MA Steiner, CA Calhoun, RW Klein, K An, E Garlea, SR Agnew / Journal of Nuclear Materials 477, 149-156 |
Plastic anisotropy of magnesium alloy AZ31B sheet | 2016 |
| SR Agnew / Essential Readings in Magnesium Technology, 351-356 |
Thermal residual strains in depleted α-U | 2013 |
| CA Calhoun, JA Wollmershauser, DW Brown, RP Mulay, E Garlea, ... / Scripta Materialia 69 (8), 566-569 |
In-situ neutron diffraction study of the Bauschinger effect in B2 structured CoZr | 2011 |
| RP Mulay, B Clausen, SR Agnew / Metallurgical and Materials Transactions A 42 (1), 60-70 |
High-strain-rate deformation of pure aluminum reinforced with 25% alumina submicron particles near the solidus temperature | 1999 |
| BQ Han, SR Agnew, DC Dunand / Scripta materialia 40 (7), 801-808 |
In-situ neutron diffraction of a quasicrystal-containing Mg alloy interpreted using a new polycrystal plasticity model of hardening due to {10.2} tensile twinning | 2018 |
| SR Agnew, A Singh, CA Calhoun, RP Mulay, JJ Bhattacharyya, ... / International Journal of Plasticity 100, 34-51 |
Monte Carlo modeling of recrystallization processes in α-uranium | 2017 |
| MA Steiner, RJ McCabe, E Garlea, SR Agnew / Journal of Nuclear Materials 492, 74-87 |
Acoustic harmonic generation from fatigue-generated dislocation substructures in copper single crystals | 2013 |
| TM Apple, JH Cantrell, CM Amaro, CR Mayer, WT Yost, SR Agnew, ... / Philosophical Magazine 93 (21), 2802-2825 |
Hard slip mechanisms in B2 CoTi | 2012 |
| RP Mulay, SR Agnew / Acta Materialia 60 (4), 1784-1794 |
Effect of twinning on the mechanical behavior of a magnesium alloy sheet during strain path changes. | 2006 |
| A Jain, SR Agnew / Magnesium Technology 2006, 219-224 |
Texture evolution during equal channel angular forging and dislocation boundary misorientations after severe plastic deformation | 1998 |
| SR Agnew, UF Kocks, KT Hartwig, JR Weertman / Nineteenth Riso International Symposium on Materials Science 1998, 201-206 |
Deformation and fracture behavior of Mg alloy, WE43, after various aging heat treatments | 2017 |
| JJ Bhattacharyya, F Wang, PJ McQuade, SR Agnew / Materials Science and Engineering: A 705, 79-88 |
Experiment-based modelling of grain boundary β-phase (Mg 2 Al 3) evolution during sensitisation of aluminium alloy AA5083 | 2017 |
| R Zhang, MA Steiner, SR Agnew, SK Kairy, CHJ Davies, N Birbilis / Scientific reports 7 (1), 2961 |
A new empirical equation for termination of twinning in magnesium alloys | 2016 |
| H Qiao, PD Wu, XQ Guo, SR Agnew / Scripta Materialia 120, 71-75 |
Blind study of the effect of processing history on the constitutive behaviour of alloy AZ31B | 2009 |
| C Dreyer, F Polesak, T Shultz, S Agnew / Magnesium Technology, 491-496 |
Measuring the effect of environment on fatigue crack-wake plasticity in aluminum alloy 2024 using electron backscatter diffraction | 2008 |
| VK Gupta, SR Agnew / Materials Science and Engineering: A 494 (1-2), 36-46 |
TEM investigation of dislocation mechanisms in Mg alloy AZ31B sheet | 2004 |
| SR Agnew, O Duygulu / Mechanisms Technology, 61-66 |
Equal channel angular processing of magnesium alloys | 2002 |
| SR Agnew, GM Stoica, LJ Chen, TM Lillo, J Macheret, PK Liaw / Ultrafine Grained Materials II, 643-652 |
Tensile and Compressive Creep Behavior of Magnesium Die Casting Alloys Containing Aluminum | 2000 |
| SR Agnew, S Viswanathan, EA Payzant, Q Han, KC Liu, EA Kenik / Magnesium Alloys and their Applications, 685-692 |
Further characterization of the aluminum peroxide oxide, AlO2, formed by interfacial reaction between Pt and α-Al2O3 | 1995 |
| YC Lu, S Agnew, R Dieckmann, SL Sass / Acta metallurgica et materialia 43 (5), 1885-1893 |
Surface preparation and bend ductility of nial | 1993 |
| JH Schneibel, SR Agnew, CA Carmichael / Metallurgical and Materials Transactions A 24 (11), 2593-2596 |
X-ray diffraction study of the phase purity, order and texture of ductile B2 intermetallics | 2010 |
| RP Mulay, JA Wollmershauser, MA Heisel, H Bei, AM Russell, SR Agnew / Acta Materialia 58 (7), 2788-2796 |
Characteristic dislocation substructure in 101¯ 2 twins in hexagonal metals | 2018 |
| F Wang, K Hazeli, KD Molodov, CD Barrett, T Al-Samman, DA Molodov, ... / Scripta Materialia 143, 81-85 |
Twin-induced hardening in extruded Mg alloy AM30 | 2017 |
| H Qiao, XQ Guo, AL Oppedal, H El Kadiri, PD Wu, SR Agnew / Materials Science and Engineering: A 687, 17-27 |
Measuring and modeling the anisotropic, high strain rate deformation of Al alloy, 7085, plate in T711 temper | 2017 |
| JJ Bhattacharyya, SR Agnew, MM Lee, WR Whittington, H El Kadiri / International Journal of Plasticity 93, 46-63 |
Effects of laser ablation coating removal (LACR) on a steel substrate: Part 2: Residual stress and fatigue | 2015 |
| M Shamsujjoha, SR Agnew, JR Brooks, TJ Tyler, JM Fitz-Gerald / Surface and Coatings Technology 281, 206-214 |
Microstructure and ductility of Mg alloy, ZK 60, after equal channel angular processing. | 2004 |
| GM Stoica, SR Agnew, E Payzant / Ultrafine Grained Materials III(as held at the 2003 TMS Annual Meeting), 427-432 |
Texture analysis as a tool for wrought magnesium alloy development | 2000 |
| SR Agnew, MH Yoo, JA Horton / Magnesium Alloys and their Applications, 117-124 |
Effects of hydrogen on the mechanical response of α-uranium | 2015 |
| CA Calhoun, E Garlea, T Sisneros, SR Agnew / Journal of Nuclear Materials 465, 737-745 |
Dislocation-twin interactions in magnesium alloy AZ31 | 2015 |
| F Wang, S Agnew / Magnesium Technology 2015, 139-144 |
The fracture behavior of B2 structured MgR intermetallics | 2009 |
| RP Mulay, SR Agnew / Scripta Materialia 61 (11), 1036-1039 |
Crystallographic texture of straight-rolled α-uranium foils via neutron and X-ray diffraction | 2017 |
| JR Einhorn, MA Steiner, SC Vogel, E Garlea, SR Agnew / Journal of Applied Crystallography 50 (3), 859-865 |
Effects of laser ablation coating removal (LACR) on a steel substrate: Part 1: Surface profile, microstructure, hardness, and adhesion | 2015 |
| M Shamsujjoha, SR Agnew, MA Melia, JR Brooks, TJ Tyler, ... / Surface and Coatings Technology 281, 193-205 |
Constitutive behavior of four wrought magnesium alloys under warm forming conditions | 2008 |
| SR Agnew, CE Dreyer, FJ Polesak III, WV Chiu, CJ Neil, M Rodriguez / Magnesium Technology, 159-164 |
Measuring the temperature dependence of the flow surface of magnesium alloy sheet | 2005 |
| A Jain, SR Agnew / Magnesium Technology 2005, 71-76 |
Ultrasonic velocity and texture of high RRR niobium | 2003 |
| SR Agnew, F Zeng, GR Myneni / Matériaux & Techniques 91 (7-8-9), 38-44 |
Structure and mechanical properties of nanocrystalline metals- with opportunities for modeling | 1998 |
| SR Agnew, BR Elliott, CJ Youngdahl, KJ Hemker, JR Weertman / Nineteenth Riso International Symposium on Materials Science 1998, 1-14 |
High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained | 2018 |
| M Shamsujjoha, SR Agnew, JM Fitz-Gerald, WR Moore, TA Newman / Metallurgical and Materials Transactions A 49 (7), 3011-3027 |
Modeling solute segregation during the solidification of γ-phase U-Mo alloys | 2016 |
| MA Steiner, E Garlea, SR Agnew / Journal of Nuclear Materials 474, 105-112 |
Crystal plasticity modeling of the dynamic behavior of magnesium alloy, WE43-T5, plate | 2015 |
| J Bhattacharyya, S Agnew, P Wu, W Wittington, H El Kadiri / Magnesium Technology 2015, 165-170 |
The Materials Genome Initiative at the National Science Foundation: A Status Report after the First Year of Funded Research | 2014 |
| K Feldman, SR Agnew / JOM 66 (3), 336 |
Hydrogen damage in the crack tip environment | 2004 |
| MR Begley, SR Agnew, U Komaragiri, RP Gangloff / Proceedings, International Congress on Fracture-i1, Elsevier Science, Oxford, UK |
Temperature dependent elastic properties of γ-phase U–8 wt% Mo | 2018 |
| MA Steiner, E Garlea, J Creasy, A DeMint, SR Agnew / Journal of Nuclear Materials 500, 184-191 |
Microstructure characterization of large TiC-Mo-Ni cermet tiles | 2017 |
| SR Agnew, JI Keene, L Dong, M Shamsujjoha, RO Mark, HNG Wadley / International Journal of Refractory Metals and Hard Materials 68, 84-95 |
What is in A Strain Hardening “Plateau”? | 2016 |
| SR Agnew, CA Calhoun, JJ Bhattacharyya / Magnesium Technology 2016, 189-194 |
Exploration of thin-walled magnesium alloy tube extrusion for improved crash performance | 2016 |
| RW Klein, BW Williams, J McKinley, JR Einhorn, SR Agnew / Magnesium Technology 2016, 223-228 |
Texture evolution during grain growth of magnesium alloy AZ31B | 2014 |
| JJ Bhattacharyya, B Radhakrishnan, G Muralidharan, SR Agnew / Magnesium Technology 2014, 233-238 |
In-situ Neutron diffraction study of aging in alloy ZK60A | 2014 |
| SR Agnew, CA Calhoun, B Clausen / Magnesium Technology 2014, 389-394 |
Deformation of O-temper AZ 31 B Mg sheet under monotonic and cyclic loading. | 2006 |
| X Lou, M Li, RK Boger, SR Agnew, RH Wagoner / Magnesium Technology 2006, 159-164 |
Fatigue Crack Tip Damage-Based Models in Structural Prognosis | 2004 |
| SR Agnew, YJ Ro, MR Begley, RP Gangloff / Proceedings, International Congress on Fracture-11, Elsevier Science, Oxford, UK |
Plasma Arc Lamp Processing of Magnesium Alloy Sheet | 2003 |
| JA Horton, CA Blue, SR Agnew / Magnesium Technology 2003, 243-247 |
Measurement and simulation of plastic anisotropy in magnesium alloy AZ 31 B sheet | 2001 |
| SR Agnew / Modelling the Performance of Engineering Structural Materials II(as held at … |
Mechanical properties of large TiC-Mo-Ni cermet tiles | 2018 |
| SR Agnew, L Dong, JI Keene, HNG Wadley / International Journal of Refractory Metals and Hard Materials 75, 238-247 |
Transmutation of Basal Dislocations by Twinning in Magnesium | 2017 |
| C Barrett, F Wang, S Agnew, H El Kadiri / Magnesium Technology 2017, 147-152 |
Measuring and Modeling the Effects of Mechanical Twinning on the Behavior of Magnesium Alloys | 2015 |
| S Agnew, P Wu, K Inal, H El Kadiri, J Wang, C Tome / Magnesium Technology 2015, 15-17 |
In-Situ Neutron Diffraction Study of the Deformation Mechanisms in Solutionized Mg-Zn Alloys | 2015 |
| RP Mulay, SR Agnew, CH Caceres / Magnesium Technology 2015, 97-102 |
Development of Thin-Walled Magnesium Alloy Extrusions for Improved Crash Performance Based Upon Texture Control | 2015 |
| BW Williams, SR Agnew, RW Klein, J McKinley / Magnesium Technology 2015, 203-208 |
A simple algorithm to eliminate ambiguities in EBSD orientation map visualization and analyses: Application to fatigue cracks in aluminum alloys | 2010 |
| VK Gupta, SR Agnew / Microscopy and Microanalysis 16 (S2), 1248-1249 |
Extracting post-uniform constitutive behavior from high temperature tensile test data | 2010 |
| C Dreyer, L Hector, S Agnew / Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box … |
Constitutive Modeling of Slip, Twinning, and Untwinning in HCP Alloys | 2008 |
| M Li, XY Lou, SR Agnew, RH Wagoner / Mechanical Properties and Numerical Simulations of Friction Stir Welded TWB … |
Infrared processing of magnesium wrought alloys | 2005 |
| JA Horton, CA Blue, T Muth, AL Bowles, SR Agnew / Magnesium Technology, 155-158 |
Forging of Magnesium Alloys | 2005 |
| PK Chaudhury, SR Agnew / ASM Handbook, Vol. 14 A, Metalworking: Bulk Forming 14, 318-323 |
Mg17Al12 Phase Precipitation Kinetics in Die Casting Alloys AZ91D and AM60B | 2001 |
| EA Payzant, SR Agnew, Q Han, S Viswanathan / Magnesium Technology 2001, 183-187 |
Deformation characteristics of Al and Mg alloys subjected to equal channel angular processing | 2001 |
| GM Stoica, LJ Chen, EA Payzant, SR Agnew, YL Lu, BQ Han, ... / TMS |
EQUAL CHANNEL ANGULAR EXTRUSION (ECAE) OF BERYLLIUM. | 2001 |
| RD Field, KT Hartwig, CT Necker, JF Bingert, SR Agnew / Los Alamos National Laboratory |
Using Deformation‐Induced Texture as an Alloy/Process Optimization Tool | 2000 |
| SR Agnew, MH Yoo / Magnesium Technology 2000, 331-339 |
Texture Development During Equal Channel Angular Forging of BCC Metals | 1999 |
| SR Agnew / Oak Ridge National Lab., TN (US) |
An assessment of severe plastic deformation for producing submicrocrystalline copper | 1998 |
| SR Agnew |
Origins of high strength and ductility combination in a Guinier-Preston zone containing Mg-Al-Ca-Mn alloy | 2019 |
| JJ Bhattacharyya, T Nakata, S Kamado, SR Agnew / Scripta Materialia 163, 121-124 |
Dislocation induced twin growth and formation of basal stacking faults in {101¯ 2} twins in pure Mg | 2019 |
| F Wang, CD Barrett, RJ McCabe, H El Kadiri, L Capolungo, SR Agnew / Acta Materialia 165, 471-485 |
Heat Treatment Strategies to Improve the Quasi-Static and Dynamic Performance of Alpha+ Beta Titanium Alloys | 2019 |
| AF Boostani, S Mujahid, AL Oppedal, C Krivanec, WR Whittington, ... / TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 1383-1387 |
Charpy Impact Energy Values for Submerged Arc Welding of ASTM A709 50CR (UNS S41003) using Austenitic Welding Wires | 2019 |
| X Xia, RM Dubas, JM Fitz-Gerald, SR Agnew, SR Sharp, J Provines / Transportation Research Board 98th Annual MeetingTransportation Research Board |
Assessing the Impact of Texture and Its Gradients on the Forming Limits of an AA6xxx Sheet Alloy | 2019 |
| JJ Bhattacharyya, N Peterson, F Sen, R Burrows, D Anderson, ... / Light Metals 2019, 1515-1523 |
Thermally Activated Slip in Rare Earth Containing Mg–Mn–Ce Alloy, ME10, Compared with Traditional Mg–Al–Zn Alloy, AZ31 | 2019 |
| V Bajikar, JJ Bhattacharyya, N Peterson, SR Agnew / Magnesium Technology 2019, 21-22 |
Integrated Computational Materials Engineering of Magnesium | 2018 |
| VM Miller, SR Agnew / JOM 70 (10), 2296-2297 |
The role of ternary alloying elements in eutectoid transformation of U10Mo alloy part I. Microstructure evolution during arc melting and subsequent homogenization annealing in … | 2018 |
| S Jana, L Sweet, D Neal, A Schemer-Kohrn, C Lavender, V Joshi / Journal of Nuclear Materials 509, 318-329 |
In-situ neutron diffraction characterization of temperature dependence deformation in α-uranium | 2018 |
| CA Calhoun, E Garlea, TA Sisneros, SR Agnew / Journal of Nuclear Materials 502, 60-67 |
The effect of precipitate-induced backstresses on plastic anisotropy: Demonstrated by modeling the behavior of aluminum alloy, 7085 | 2018 |
| JJ Bhattacharyya, B Bittmann, SR Agnew / International Journal of Plasticity |
Corrosion of Magnesium in Multimaterial System | 2017 |
| VV Joshi, S Agnew / JOM 69 (11), 2320-2321 |
Efficient rolling texture predictions and texture-sensitive thermomechanical properties of α-uranium foils | 2017 |
| MA Steiner, RW Klein, CA Calhoun, M Knezevic, E Garlea, SR Agnew / Journal of Nuclear Materials 495, 234-243 |
Path length dependent neutron diffraction peak shifts observed during residual strain measurements in U–8 wt% Mo castings | 2017 |
| MA Steiner, JR Bunn, JR Einhorn, E Garlea, EA Payzant, SR Agnew / Journal of Applied Crystallography 50 (3), 851-858 |
Crystal Plasticity Analysis of Compressive Loading Behavior of Extruded LPSO-type Ng-Zn-Y alloy | 2017 |
| T Mayama, YQ Chi, G Garces, JR Einhorn, SR Agnew / 대한기계학회 춘추학술대회, 54-55 |
International Journal of Refractory Metals & Hard Materials | 2017 |
| SR Agnew, JI Keene, L Dong, M Shamsujjoha, MR O'Masta, HNG Wadley / International Journal of Refractory Metals & Hard Materials 68, 84-95 |
Using the Crystal Plasticity Approach to Parse the Effects of Alloying and Aging on the Mechanical Behavior of Wrought Mg Alloys | 2017 |
| SR Agnew, JJ Bhattacharyya, F Wang, PJ McQuade / Magnesium Technology 2017, 13-15 |
The Effect of Twin Boundary on the Evolution of Defect Substructure | 2017 |
| F Wang, CD Barrett, K Hazeli, KD Molodov, T Al-Samman, A Oppedal, ... / Magnesium Technology 2017, 175-180 |
The Relative Contributions of Deformation Modes to AZ31 Rolling Textures in Different Temperature Regimes | 2017 |
| MA Steiner, JJ Bhattacharyya, SR Agnew / Magnesium Technology 2017, 555-561 |
Portable Optical Profilometer Device, System and Method | 2016 |
| WL Suhring, JM Fitz-Gerald, R Klein, SR Agnew, ST Acton / US Patent App. 14/835,387 |
Constructing portable depth from defocus optical profilometers for surface roughness evaluation | 2015 |
| R Klein, M Steiner, W Suhring, S Agnew, J Fitz-Gerald / Surface Topography: Metrology and Properties 3 (1), 015005 |
Why do Magnesium Alloys Develop Sharp Textures Upon Dynamic Recrystallization? | 2015 |
| H El Kadiri, CD Barrett, A Imandoust, SR Agnew, M Cherkaoui, K Inal / Magnesium Technology 2015, 159-163 |